...
شعار
التعبئة والتغليف

بيت

>

Supplement Sample Kit Packaging for Mixed-Flavor Trial Packs

Supplement Sample Kit Packaging for Mixed-Flavor Trial Packs

يشارك:

جدول المحتويات

Start a mixed-flavor supplement sample kit with the number of servings and the order in which customers should find them. A divided folding carton works when each flavor needs a fixed position. A paper tube can work when the sealed packets have a similar size and customers can pick them in any order.

إجابة سريعة

  • Use a divided carton when order matters. Give each flavor or day its own compartment and check that the labels are visible when the carton opens.
  • Sample a paper tube for a loose assortment. Load the complete set of filled packets, then check that the first and last packets can be reached.
  • Check variants before sharing tooling. Test the largest filled packet from each variant and confirm divider fit, تحديد النكهة وتسلسل التعبئة.

اختر الهيكل حول التشكيلة

تنسيقات الحزمة التجريبية والفحوصات المهمة عند الموافقة على العينة
شكل استخدم متى التحقق أثناء أخذ العينات
كرتونة قابلة للطي مع فواصل يجب أن تظل النكهات مجمعة أو يجب على العملاء اتباع التسلسل. تحقق من ارتفاع المقسم, إشارات النكهة المطبوعة والوصول إلى الأصابع. تعامل مع العبوة المغلقة وتحقق مما إذا كانت الحزم تتحرك بين المقصورات.
كرتونة قابلة للطي بدون فواصل يمكن أن تتشارك الحزم المماثلة في التجويف ويتم تحديدها على الحزم الفردية. تحقق من التحول وضغط الغطاء. حاول إزالة الحزمة دون رفع الحزمة بالكامل.
أنبوب ورقي قابل لإعادة الإغلاق تتناسب الحزم مع فتحة مشتركة ويمكن اختيار المجموعة بأي ترتيب. تحقق مما إذا كان بإمكان العملاء التعرف على النكهات قبل سحب عدة عبوات. الموافقة على الفتح الواضح والارتفاع القابل للاستخدام عند العد الكامل.
أنبوبان من ورق مسحوق البروتين الأبيض والذهبي, واحد في وضع مستقيم والآخر على جانبه.
الجزء الخارجي من الأنبوب الورقي للمشروعات التي يمكنها استخدام تشكيلة فضفاضة. قم بتأكيد الفتح وملاءمته للحزم المملوءة فعليًا.

لإجراء مقارنة أوسع تشمل الزجاجات والعبوات ذات النكهة الواحدة, انظر دليل التعبئة والتغليف التكميلي لأنابيب الورق والكرتون.

عملت المثال لمدة 12 عصا, طقم تجريبي بثلاث نكهات

في هذا المثال, تحتوي المجموعة على ثلاث نكهات مع أربعة أعواد محكمة الغلق من كل نكهة. تريد العلامة التجارية أن يرى المتسوقون النكهات الثلاثة معًا, لذلك تستخدم العينة الأولى كرتونة بثلاثة ممرات. افترض أكبر مقاييس الحزمة المملوءة 118 مم طويلة و 30 ملم واسعة في الختم. كل حارة تحمل كومة من أربعة.

  1. ابدأ بالحجم الواضح لمسار واحد. توضيحية 123 × 33 mm lane leaves 5 mm in length and 3 mm in total width around the largest packet (123 - 118 و 33 - 30). Measure the lane between the assembled dividers at its narrowest point.
  2. Measure stack height using four filled packets. Build a stack for each flavor in the intended orientation. Check the tallest stack with the lid closed. Adjust the space above the stack and the divider height together so the carton closes and the packets stay in their lanes.
  3. Build the total footprint from the dividers. The three clear lanes alone need 99 mm across (3 × 33 مم). Add the space occupied by the two divider walls and any tabs or folds that intrude before specifying the carton. Use the assembled sample to verify the fit.
  4. Test picking and removal. Pack four of each flavor, check the printed lane cues and count each stack. Open the kit as a customer would and remove the top and bottom sticks from every lane. If the last stick sits too deep to grasp, trial a finger notch in the divider and check that the remaining sticks stay in place during handling.

The dimensions are sample inputs for this illustration. Base the production drawing on your filled packets and the actual divider construction. If you trial a tube for the same 12 العصي, check the combined bundle and clear opening using our stick-pack tube sizing guide.

Plan variant changes and packing checks

If two assortments use the same count and packet envelope, ask the converter whether they can share the carton and divider dielines. List which components will be common and which need variant-specific artwork, such as the flavor legend, outer label or printed sleeve. Confirm what the converter can combine for tooling and what it will quote separately for print setup or minimum order quantity.

Give the packing team a pack-out sheet that shows the SKU, flavor in each position and units per flavor. Try the packing sequence with a small set of kits before production. Verify the finished count and variant against the sheet, then check how the labeled retail units fit in the shipping case.

What to send for a supplement sample kit quote

يرسل filled packet dimensions, counts by flavor, order quantity by kit SKU and delivery destination. Add the desired opening style, any printed flavor cues, the packing method and the required arrival date. If you need variants to share a carton structure, list all combinations in the same request.

استكشاف كرتونة قابلة للطي مخصصة أو اطلب عرض أسعار لمجموعات عينات المكملات ذات النكهات المختلطة.

تواصل معنا

مدونات شعبية

It seems we can't find what you're looking for.

قم بتأمين ميزتك التنافسية مع خدمات موثوقة, تغليف مخصص من المصنع مباشرة

اجعل رؤية التغليف الخاصة بك تنبض بالحياة تمامًا كما تتخيلها. العمل مباشرة مع مهندسينا لضمان الدقة, جودة, وفعالية التكلفة في كل خطوة.

اتصل بنا

*نحن نحترم سريتك وجميع المعلومات محمية.

انتظر! لا تزال تبحث?

لا تترك مع الأسئلة التي لم تتم الإجابة عليها. يمكن لخبراء التغليف لدينا مساعدتك في العثور على الحل الدقيق للصندوق الورقي أو الأنبوب الذي تحتاجه.

قبل أن تذهب

اسمح لنا بمساعدتك مباشرةً

*نحن نحترم سريتك وجميع المعلومات محمية.