Start a mixed-flavor supplement sample kit with the number of servings and the order in which customers should find them. A divided folding carton works when each flavor needs a fixed position. A paper tube can work when the sealed packets have a similar size and customers can pick them in any order.
Quick answer
- Use a divided carton when order matters. Give each flavor or day its own compartment and check that the labels are visible when the carton opens.
- Sample a paper tube for a loose assortment. Load the complete set of filled packets, then check that the first and last packets can be reached.
- Check variants before sharing tooling. Test the largest filled packet from each variant and confirm divider fit, flavor identification and the packing sequence.
Choose the structure around the assortment
| Format | Use when | Check during sampling |
|---|---|---|
| Folding carton with dividers | Flavors need to stay grouped or customers should follow a sequence. | Check divider height, printed flavor cues and finger access. Handle the closed pack and check whether packets move between compartments. |
| Folding carton without dividers | Similar packets can share a cavity and are identified on the individual packs. | Check for shifting and lid pressure. Try removing a packet without lifting the full stack. |
| Reclosable paper tube | Packets fit a common opening and the assortment can be picked in any order. | Check whether customers can identify the flavors before pulling out several packets. Approve the clear opening and usable height at full count. |

For a wider comparison that includes bottle and single-flavor packs, see the supplement packaging guide for paper tubes and cartons.
Worked example for a 12-stick, three-flavor trial kit
In this example, the kit holds three flavors with four sealed sticks of each flavor. The brand wants shoppers to see all three flavors together, so the first sample uses a carton with three lanes. Assume the largest filled packet measures 118 mm long and 30 mm wide at the seal. Each lane holds a stack of four.
- Start with the clear size of a single lane. An illustrative 123 × 33 mm lane leaves 5 mm in length and 3 mm in total width around the largest packet (123 − 118 and 33 − 30). Measure the lane between the assembled dividers at its narrowest point.
- Measure stack height using four filled packets. Build a stack for each flavor in the intended orientation. Check the tallest stack with the lid closed. Adjust the space above the stack and the divider height together so the carton closes and the packets stay in their lanes.
- Build the total footprint from the dividers. The three clear lanes alone need 99 mm across (3 × 33 mm). Add the space occupied by the two divider walls and any tabs or folds that intrude before specifying the carton. Use the assembled sample to verify the fit.
- Test picking and removal. Pack four of each flavor, check the printed lane cues and count each stack. Open the kit as a customer would and remove the top and bottom sticks from every lane. If the last stick sits too deep to grasp, trial a finger notch in the divider and check that the remaining sticks stay in place during handling.
The dimensions are sample inputs for this illustration. Base the production drawing on your filled packets and the actual divider construction. If you trial a tube for the same 12 sticks, check the combined bundle and clear opening using our stick-pack tube sizing guide.
Plan variant changes and packing checks
If two assortments use the same count and packet envelope, ask the converter whether they can share the carton and divider dielines. List which components will be common and which need variant-specific artwork, such as the flavor legend, outer label or printed sleeve. Confirm what the converter can combine for tooling and what it will quote separately for print setup or minimum order quantity.
Give the packing team a pack-out sheet that shows the SKU, flavor in each position and units per flavor. Try the packing sequence with a small set of kits before production. Verify the finished count and variant against the sheet, then check how the labeled retail units fit in the shipping case.
What to send for a supplement sample kit quote
Send filled packet dimensions, counts by flavor, order quantity by kit SKU and delivery destination. Add the desired opening style, any printed flavor cues, the packing method and the required arrival date. If you need variants to share a carton structure, list all combinations in the same request.
Explore custom folding cartons or request a quote for mixed-flavor supplement sample kits.