For global brands sourcing paper tubes, 硬い箱, folding cartons or food packaging, sustainability is no longer only about choosing kraft paper or adding an FSC logo. EUDR準拠 is becoming part of the sourcing conversation because certain wood- and paper-based products can fall within the EU Deforestation Regulation depending on their tariff classification and how they are placed on the EU market.
しかし, packaging scope is more nuanced than many buyers expect. Standalone paper or wood packaging sold as a product in its own right can be covered when it falls within Annex I, while packaging used exclusively to support, protect or carry another product is excluded from EUDR scope. したがって, buyers should confirm the actual CN/HS classification, commercial use and supply-chain role before assuming that every paper package is regulated in the same way.
What Is EUDR Compliance for Paper Packaging?
EUDR準拠 means meeting the applicable requirements of Regulation (EU) 2023/1115 for relevant commodities and products associated with deforestation and forest degradation. For paper packaging, wood is the relevant commodity, while specified pulp, paper and paperboard products appear within the Regulation’s Annex I scope.
In practical terms, EUDR準拠 starts with a scope check. A buyer or supplier should identify the product code, determine whether the package is being placed on the market as standalone packaging or merely used to carry another product, and then confirm which company in the chain is acting as operator, downstream operator or trader.
This distinction really matters.
The European Commission’s latest FAQ says that packaging placed on the EU market or exported as a product in its own right can be covered. By contrast, packaging used exclusively to support, protect or carry another product is not considered a relevant product for this purpose.
For covered products, due diligence focuses on traceability, legality and deforestation-free sourcing. Operators must collect required information, assess risk and, where necessary, reduce that risk to the required level before placing relevant products on the EU market or exporting them.
When Does the EUDR Apply?
The Regulation entered into force in 2023, although its substantive application dates were subsequently amended.
Current EUDR準拠 requirements apply from:
- 30 December 2026 for large and medium operators
- 30 June 2027 for most micro and small operators
- 30 December 2026 for micro and small operators already covered by the previous EU Timber Regulation
These are the current European Commission dates as of August 2026.
For brands planning EU launches, this means sourcing should be reviewed before the shipment is already sitting in production.
その間, another major EU packaging rule is already relevant: the Packaging and Packaging Waste Regulation, or PPWR, generally applies from 12 August 2026. したがって, EU-bound packaging projects increasingly need to consider sourcing, リサイクル可能性, material reduction and other packaging requirements together.
Does EUDR Apply to Every Paper Box or Paper Tube?
No.
This is probably the most important point in the entire article.
The official FAQ explains that paper or wood packaging sold as standalone packaging can be in scope, while packaging used only to support, protect or carry another product is not. したがって, EUDR準拠 cannot be determined simply by seeing that a package is made from paper.
例えば, imagine an EU importer purchases 20,000 empty custom perfume boxes from an overseas packaging manufacturer.
Those empty boxes are being supplied as packaging products in their own right.
Now compare that with perfume bottles imported into the EU already packed inside their retail paper boxes. If those boxes are classified together with the perfume and merely support, protect or carry the product, the EUDR treatment of the packaging itself can be different.
That distinction is easy to miss.
What About Recycled Paper?
Recycled paperboard also needs careful analysis.
According to the Commission’s current FAQ, products produced entirely from material that has completed its lifecycle and otherwise would have become waste are outside the Regulation. しかし, if a recycled paperboard contains non-recycled material, the non-recycled portion can still be subject to the relevant traceability requirements.
したがって, ask the supplier whether a “recycled board” is:
- 100% recovered post-lifecycle material, または
- a mixture of recycled fiber and virgin pulp.
Those are not necessarily the same situation under EUDR.
一般的なアプリケーション
EUDR requirements can become relevant across many custom packaging categories when the packaging itself is supplied as a relevant standalone product.
Perfume and Fragrance Packaging
Perfume brands frequently use:
- Rigid paper tubes
- Shoulder-neck tubes
- Telescopic tubes
- Rigid gift boxes
- Drawer boxes
- Magnetic boxes
A luxury package may combine greyboard, specialty wrapping paper, a paperboard insert and decorative finishing.
For EU sourcing, the buyer should first determine whether the empty packaging itself is being imported or placed on the market as a product in its own right. If so, the sourcing documentation may need to support EUDR準拠, depending on the applicable classification and the buyer’s role.
Skincare and Cosmetics
Cosmetics brands may use:
- Folding cartons
- Paper tubes
- Rigid boxes
- Sleeve boxes
- Gift sets
A skincare buyer may also request FSC-certified paper, recycled board or molded-pulp inserts.
Those attributes can support broader sustainability objectives. しかし, FSC or recycled content does not automatically replace EUDR準拠 obligations where the Regulation actually applies.
特に, the European Commission states that certification schemes may support risk assessment, but operators remain legally responsible for due diligence.
Tea and Coffee
Tea and coffee packaging may include:
- Paper tubes
- 折りたたみボックス
- Food gift boxes
- Kraft cartons
- Foil-lined paper cans
Some products also use a sealed high-barrier pouch inside the paper package.
One detail deserves attention here: coffee itself is one of the commodities covered by EUDR, while the outer paper package may fall under a different Annex I classification and supply-chain scenario. したがって, buyers should not assume that the compliance analysis for the coffee automatically answers the compliance question for the packaging.
Chocolate and Snacks
チョコレート, candy and snack packaging can use:
- Paper tubes
- Food cartons
- Windows
- Inserts
- Paper trays
- Foil liners
Again, the outer package and food inside it may have different regulatory treatment.
したがって, procurement teams should document the packaging specification and food-product compliance separately rather than putting everything under one vague “sustainable packaging” label.
Candles and Gift Products
Heavy candle jars often require thick paperboard and fitted inserts.
Gift packaging may also include multiple paper components.
If those empty packaging products are supplied separately into the EU market, classification and supply-chain documentation should be reviewed early.
材質のオプション
Material selection affects both packaging performance and the documentation required for sustainable sourcing.
クラフト紙
Kraft paper is popular because it creates a natural appearance with relatively simple printing.
Possible options include:
- Natural brown kraft
- 白いクラフト
- Black kraft
- Recycled kraft
- Specialty kraft
When virgin wood fiber is used in a relevant product, the Regulation may require traceability through the responsible operator’s due-diligence system.
アート紙
Coated art paper works particularly well for:
- CMYK
- パントン
- Photography
- 詳細なイラスト
- Fine typography
しかし, a smooth white surface tells the buyer almost nothing about fiber origin.
したがって, brands should request actual material and supply-chain information rather than judging sustainable sourcing by appearance.
特殊紙
Premium packaging may use:
- 亜麻紙
- Leather-texture paper
- Pearlized paper
- Dyed-through paper
- Metallic-effect paper
Specialty materials can involve several supply-chain participants.
結果として, the supporting documentation should follow the actual fiber-containing paper and applicable supplier chain—not merely the decorative material name.
Recycled Paperboard
Recycled paperboard can reduce demand for virgin fiber.
それにもかかわらず, many recycled grades contain some virgin pulp for strength.
したがって, buyers should request the material composition rather than simply seeing “recycled paperboard” on a quotation and assuming it is entirely outside EUDR scope. The Commission’s FAQ specifically distinguishes fully recovered material from products containing non-recycled fiber.
Food-Grade Paper
Food packaging may use:
- Food-grade white paper
- PEコート紙
- 耐油紙
- Barrier paper
- 食品グレードの板紙
EUDR準拠 and food-contact safety are separate topics.
One concerns deforestation-related sourcing and market-access obligations. The other concerns whether the materials are suitable for the intended food-contact conditions.
その結果, one certificate should not be treated as proof of the other.
Foil Liner
Aluminum foil and foil-based laminates can provide:
- Moisture resistance
- Aroma protection
- Grease protection
- Light barrier
しかし, adding foil does not remove the need to understand the sourcing and classification of the paperboard body itself.
構造オプション
Structure affects the bill of materials, even though structure alone does not decide whether the product falls within EUDR scope.
Paper Lid and Base
A paper lid and paperboard body create a fiber-dominant package.
For standalone packaging in scope, the responsible operator should still determine whether the Regulation applies to those materials.
ショルダーネックチューブ
A shoulder-neck tube includes an inner paperboard neck that fits inside the lid.
This structure can improve lid fit and provide a premium opening experience.
It also adds another fiber component that should appear clearly in the material specification.
Telescopic Tube
A telescopic tube normally uses:
- A long upper lid
- A short lower base
- An optional insert
This structure works particularly well for perfume, スキンケア, candle and premium gift packaging.
Although the tube looks more sophisticated, the regulatory obligations are still based on scope, sourcing, classification and supply-chain role—not whether the package looks simple or luxurious.
Paperboard Inserts
Paperboard inserts can reduce the amount of plastic used in suitable applications.
They are commonly used for:
- 化粧品
- Skincare
- Lightweight bottles
- Gift products
Molded-Pulp Inserts
Molded pulp can hold bottles or jars securely while maintaining a fiber-based presentation.
しかし, the exact fiber composition and sourcing information should still be documented where relevant.
Window Packaging
A PET window or cellulose-based window changes the complete material structure.
したがって, the buyer should evaluate:
- EUDR
- PPWR
- リサイクル可能性
- material separation
as separate but connected questions.
Push-Up and Twist-Up Tubes
Push-up structures are particularly useful for:
- Deodorant
- リップクリーム
- Solid perfume
- Solid skincare
その間, twist-up structures can involve additional components.
Functional performance and material sourcing should therefore be evaluated together.
印刷 & 仕上げオプション
Premium printing does not determine EUDR status, but it does affect the overall sustainability profile of the package.
CMYK印刷
CMYK works well for:
- Photography
- グラデーション
- Multi-color graphics
- Product illustrations
For EUDR purposes, the important point is whether the relevant fiber sourcing and due-diligence obligations can be supported where the product is in scope.
Pantone Printing
Pantone printing helps brands maintain consistent colors across:
- Paper tubes
- Rigid boxes
- Folding cartons
- Paper bags
A simple one- or two-color design can also reduce visual complexity.
Hot Stamping
金, silver and colored foil can create a premium appearance.
しかし, a smaller foil area often gives a cleaner luxury result than covering the whole package.
エンボス加工とデボス加工
Embossing raises the paper surface, while debossing pushes the design inward.
These techniques can create visual value without requiring large printed areas.
スポットUV
Spot UV creates gloss contrast on selected areas.
それにもかかわらず, coatings should also be reviewed when recyclability targets are important.
Matte and Gloss Lamination
Lamination can improve surface protection and appearance.
しかし, film choices may affect the recycling behavior of the finished package.
したがって, brands should consider EUDR together with PPWR, recyclability and end-of-life design rather than treating each requirement separately.
EUDR Due Diligence: What Buyers Should Understand
For products within scope, EUDR準拠 is built around due diligence.
The European Commission’s latest FAQ describes three core steps for operators:
- Information collection
- Risk assessment
- Risk mitigation where necessary
Information can include the relevant product, 量, supplier, country of production and geolocation information for production plots, together with evidence relevant to legality.
If the operator cannot obtain required information, the Commission’s FAQ states that the affected relevant product should not be placed on the EU market or exported.
Does FSC Replace EUDR Due Diligence?
No.
Certification can certainly help.
しかし, the Commission explicitly states that certification or verification schemes can assist the risk-assessment process only to the extent that they provide the required information. Operators still have to exercise due diligence and remain legally responsible for breaches.
したがって, FSC documentation may support sourcing evidence, but it should not be presented as a substitute for EUDR準拠.
How Long Must Records Be Kept?
The Commission FAQ states that operators should keep relevant information and evidence for five years, while applicable downstream operators and traders also have five-year record-keeping duties for specified supply-chain information.
What Should Packaging Buyers Ask Suppliers For?
A practical EUDR準拠 request should be more detailed than:
“Do you have an EUDR certificate?”
EUDR is not simply a certificate-shopping exercise.
その代わり, ask for information such as:
- 材料構成
- Virgin fiber percentage
- Recycled fiber percentage
- Applicable HS/CN classification
- Paper supplier information
- Country of production
- Traceability information
- Certification documents where relevant
- Batch or order traceability
- Applicable due-diligence references
- Whether the package is supplied standalone or around another product
もちろん, the exact documents depend on whether the specific product and transaction actually fall within EUDR scope.
FSC, EUDR, PPWR and EPR: What Is the Difference?
These four terms often appear in one packaging discussion, but they are not interchangeable.
FSC
FSC is a forest-management and chain-of-custody certification system.
It can help brands demonstrate responsible fiber sourcing.
EUDR
EUDR focuses on covered commodities and derived products being deforestation-free and legally produced before they are placed on or exported from the EU market.
PPWR
PPWR deals with packaging throughout its lifecycle.
It generally applies from 12 August 2026 and covers packaging regardless of material or origin. The Regulation includes requirements relating to manufacturing, composition, waste prevention and recyclability, with an objective of making packaging economically recyclable by 2030.
EPR
Extended Producer Responsibility systems deal with the responsibilities of companies placing packaging on national markets and can involve registration, reporting and fees.
したがって, EUDR準拠 should form part of a wider packaging compliance matrix instead of replacing FSC, PPWR, EPR or food-contact requirements.
Sustainable Paper Packaging Beyond EUDR
EUDR準拠 matters, but sustainable packaging should also use materials efficiently.
例えば, brands can consider:
- Right-sizing the package
- Avoiding unnecessary board thickness
- Using recycled content where suitable
- Selecting responsibly sourced fiber
- Replacing unnecessary foam with paperboard or molded pulp
- Removing unnecessary mixed materials
- Designing removable inserts
- Improving shipping-carton utilization
- Using fewer decorative processes where possible
PPWR is especially relevant here because its objectives include reducing packaging and waste generation and making packaging placed on the EU market recyclable in an economically viable way by 2030.
したがって, a strong packaging project should not stop at “Where did the paper come from?”
It should also ask:
“Are we using more packaging than the product actually needs?”
Related Guide: Biodegradable Paper Tube Packaging
If you are also evaluating fiber-based structures and environmental claims, read our Biodegradable Paper Tube Packaging for Beauty and Food Brands guide.
That article explains how paperboard, コーティング, ホイルライナー, windows and inserts affect biodegradable, recyclable and plastic-free claims.
Together, these pages answer two different buyer questions:
Does the sourcing and regulatory pathway support EUDR compliance?
そして
How should the final package be designed and described from an environmental end-of-life perspective?
This is exactly the kind of relevant internal-link relationship Google recommends. Google says it analyzes links between pages to understand ecommerce site structure and relative page importance, while clear anchor text also helps users and Google understand the destination page.
How to Customize Sustainable Paper Packaging
Start with the product rather than the certificate list.
ステップ 1: Define the Product
提供する:
- 製品タイプ
- Dimensions
- Weight
- Primary container
- Food-contact condition
- 注文数量
- ターゲット市場
ステップ 2: Confirm the Structure
Possible structures include:
- Paper tube
- Shoulder-neck tube
- 伸縮チューブ
- Rigid paper box
- Folding carton
- Sleeve
- Window package
- プッシュアップチューブ
ステップ 3: Choose Materials
から選択:
- クラフト紙
- アート紙
- 特殊紙
- Recycled paperboard
- Food-grade paper
- Barrier materials
Then ask which materials can support the required traceability and sustainability goals.
ステップ 4: Review EUDR Scope
Before final approval, confirm whether EUDR準拠 is actually relevant to the packaging transaction.
Ask:
- Is the packaging standalone?
- What is its CN/HS code?
- Is it virgin, recycled or mixed fiber?
- Who is the EU operator/importer?
- What due-diligence records are required?
This step is especially important because the Commission’s official FAQ makes the standalone-versus-supporting-packaging distinction explicit.
ステップ 5: Select Printing and Finishing
Options include:
- CMYK
- パントン
- ホットスタンピング
- エンボス加工
- デボス加工
- スポットUV
- マットラミネート
- グロスラミネート
If recyclability is a key target, simplify processes that do not create meaningful customer value.
ステップ 6: Prepare Artwork
Provide editable:
- AI
- EPS
Separate:
- ディエリン
- CMYK
- パントン
- Foil
- Emboss
- Deboss
- スポットUV
- Window
ステップ 7: Produce Samples
Check:
- Dimensions
- 蓋のフィット感
- Insert fit
- Product positioning
- 印刷
- Surface finishing
- Transportation protection
ステップ 8: MOQとリードタイムの確認
MOQ and production time depend on:
- サイズ
- 材料
- 構造
- 入れる
- 印刷
- Finishing
- Tooling
- Quantity
したがって, finalize the complete specification before locking the launch schedule.
関連製品: カスタム紙管 / 食品包装 / 化粧品包装
パック包装を選ぶ理由?
Pack Packaging supports custom paper tubes and paper boxes from structural development through mass production.
Our manufacturing facility covers 20,000㎡, including a 2,000㎡の食品グレードのワークショップ. Monthly paper tube production capacity exceeds 10,000,000 pieces, while our 20+ member design team supports structural design, 材料の選択, インサート, アートワーク, sampling and production planning.
For EU-bound packaging, our role is to help customers organize their specifications and available supply-chain documentation clearly. しかし, EUDR準拠 ultimately depends on the specific classification, transaction, supply-chain role and legal responsibility of the parties involved.
Our OEM and ODM capabilities include:
- Custom paper tubes
- Rigid paper boxes
- Folding cartons
- クラフト紙
- アート紙
- 特殊紙
- Recycled paperboard
- Food-grade materials
- 板紙インサート
- Molded-pulp inserts
- EVA/EPE where required
- CMYK印刷
- パントン印刷
- ホットスタンピング
- エンボス加工
- デボス加工
- スポットUV
- マットラミネート
- グロスラミネート
- Soft-touch finishing
- 構造サンプリング
- Printed sampling
- Quality inspection
- 輸出梱包
Depending on the approved project, supporting documents may include FSC-related documentation, food-contact reports, BRC-related documentation, IFS-related information, リーチ-SVHC, RoHS 2.0 and EPR support documentation.
Exact applicability should always be confirmed for the final material and destination market.
よくある質問
1. Does EUDR apply to all paper packaging?
No.
The Commission’s latest FAQ says standalone paper or wood packaging can be covered, while packaging used exclusively to support, protect or carry another product is excluded from the packaging scope.
2. Are empty custom paper boxes imported into the EU potentially covered?
はい, potentially.
If empty boxes are supplied as products in their own right and fall within Annex I, the relevant EUDR rules may apply. The actual CN classification and importer role should therefore be checked.
3. Does FSC certification automatically satisfy EUDR?
No.
Certification may support risk assessment, but operators remain responsible for due diligence and breaches.
4. Is 100% recycled paperboard covered?
Material produced entirely from material that completed its lifecycle and would otherwise become waste is outside the Regulation according to the Commission FAQ.
しかし, recycled grades containing virgin fiber need additional review.
5. What is the deforestation cut-off date?
For relevant products, the EUDR deforestation-free requirement is based on commodities not being produced on land subject to deforestation after 31 December 2020.
6. When do the rules apply?
Current official dates are:
Large and medium operators: 30 December 2026
Most micro and small operators: 30 June 2027.
7. Is geolocation required?
For operators conducting standard due diligence on relevant products, geographic information for the plots where the relevant commodity was produced is a core information requirement. Specific simplified regimes can apply in defined circumstances.
8. What information should I send when requesting packaging?
Send:
- 製品寸法
- Packaging size
- Quantity
- ターゲット市場
- Preferred material
- 構造
- Insert requirements
- 印刷
- Finishing
For EU projects, also tell the supplier whether the packaging will be imported as empty standalone packaging or will already contain another product.
カスタム パッケージング ソリューションをさらに詳しく見る
より多くの梱包オプションを探しています? さまざまな業界や用途向けに設計された当社のカスタムパッケージ製品の全範囲をご覧ください。.
折りたたみボックス – 小売包装用の軽量で完全にカスタマイズ可能なカートン.
リジッドボックス – 高級ブランド向けのプレミアム硬質ギフトボックス.
段ボール箱 – 耐久性のある配送および電子商取引梱包ソリューション.
小児用安全ボックス – 規制対象製品の安全な梱包.
付属品 – カスタムインサート, ティッシュペーパー, リボン, ラベル, などなど.
紙管 – お茶用のカスタム紙管パッケージの専用コレクションをご覧ください, コーヒー, 化粧品, キャンドル, 精霊, および当社の専門ウェブサイトのその他のプレミアム製品.
カスタムパッケージが必要? 無料の見積もりと専門家による相談については、今すぐ当社のチームにお問い合わせください.



