You may have already chosen the box structure, material and size. ثم, just when the project seems ready for production, the packaging supplier replies: “Please send the editable AI or PDF artwork file.”
That is where many projects slow down.
Preparing custom packaging artwork files correctly can prevent missing fonts, blurry logos, unexpected color changes, misplaced foil, incorrect dielines and repeated artwork revisions. والأهم من ذلك, a clean print-ready file helps the packaging factory move from design approval to sampling and mass production much faster.
لذا, before you send your final artwork, it is worth spending a few minutes checking the details that actually matter in production.
What Are Custom Packaging Artwork Files?
Custom packaging artwork files are the production-ready design files used to print and finish a custom paper box, أنبوب الورق, كم, carton or other package.
They are different from a simple JPG mockup.
A mockup shows what the packaging should look like. لكن, a production artwork file tells the factory exactly where every element should be printed, يقطع, مطوية, stamped, embossed or coated.
A complete file may contain:
- Packaging dieline
- Cutting lines
- Creasing or folding lines
- Bleed area
- Safe area
- عمل فني CMYK
- ألوان بانتون
- الشعار
- اسم المنتج
- مكونات
- الباركود
- Regulatory information
- Hot-stamping layer
- Embossing layer
- Debossing layer
- Spot UV layer
- Window position
- Glue area
- Insert artwork
لهذا السبب, packaging artwork should always be built on the final approved dieline rather than on an estimated rectangle.
Preferred File Formats
For most custom packaging projects, useful production formats include:
- Adobe Illustrator
.AI - Editable
.PDF .EPS
اعتمادا على المشروع, PSD or high-resolution image files may also be supplied for photographic elements.
لكن, vector files are generally more suitable for logos, نص, cutting paths and special-finishing areas because they can be scaled without losing edge quality.
Why JPG and PNG Files Are Usually Not Enough
A JPG or PNG can be useful as a visual reference. مع ذلك, it normally does not contain editable:
- Vector text
- ألوان بانتون
- Dielines
- Foil layers
- Embossing paths
- Cutting information
لذلك, do not send only a screenshot and expect the factory to reproduce every detail accurately.
If editable artwork is unavailable, tell the supplier early. The design team can then confirm whether artwork reconstruction is required before sampling.
Why Artwork Preparation Matters
جيد custom packaging artwork files do more than improve print quality.
They can also reduce:
- Artwork revisions
- Sample corrections
- Production delays
- Color misunderstandings
- Incorrect foil positions
- Missing information
- Reprinting risk
بصدق, many packaging delays happen before the machine even starts.
A bottle may already be approved. The packaging dimensions may already be confirmed. Yet production still cannot begin because the logo is missing, fonts are unavailable or the foil layer has not been separated.
لذلك, good artwork preparation is part of production planning, not merely graphic design.
Start With the Correct Packaging Dieline
Before placing graphics, make sure you are working on the final dieline supplied or approved by the packaging manufacturer.
A dieline is the flat technical drawing of the package before it is folded or formed.
It may show:
- Cut lines
- Fold lines
- Glue areas
- Lid areas
- Bottom areas
- Seams
- ويندوز
- Insert positions
- Overlap sections
Never assume that two boxes of the same outer size use the same dieline.
على سبيل المثال, a straight tuck-end carton, magnetic rigid box and drawer box may all measure 100 × 100 × 50 mm externally, yet their artwork layouts are completely different.
The same principle applies to cylindrical packaging.
A paper tube requires the designer to consider:
- Circumference
- Vertical seam
- Lid overlap
- Bottom section
- الرقبة الداخلية
- Visible front area
لذلك, structural approval should happen before الموافقة النهائية على العمل الفني.
Understand Cut Lines, Fold Lines and Safe Areas
A packaging dieline usually contains several technical lines.
These should remain separate from the printed artwork.
Cut Line
The cut line shows where the packaging will be trimmed.
Do not place important text directly on this line.
Fold or Crease Line
Fold lines indicate where cartons will bend or where rigid-box components meet.
Avoid placing critical text directly across a fold unless the design intentionally requires it.
Bleed Area
Artwork that reaches the edge of a package should extend beyond the trim line into the bleed area.
Adobe’s Illustrator workflow supports setting bleed areas and printer’s marks for print production.
أ 3 mm bleed is common in many printing workflows, but the final requirement should always follow the factory’s dieline.
بعبارة أخرى, do not assume every packaging project uses exactly the same bleed.
Safe Area
الشعارات, small text, barcodes and important information should remain safely inside the trim edge.
The exact safe distance depends on:
- بناء
- Cutting tolerance
- Folding
- Tube seam
- Window position
- التشطيب
لذلك, follow the safe zone shown on the production dieline whenever one is provided.
التطبيقات المشتركة
The preparation of custom packaging artwork files changes slightly depending on what the packaging will hold.
تغليف العطور
Perfume packaging often contains relatively simple front graphics but more complex finishing.
A premium fragrance package may require separate artwork layers for:
- Main CMYK or Pantone print
- احباط الذهب
- Embossed logo
- بقعة الأشعة فوق البنفسجية
- Inner neck color
- Insert branding
على سبيل المثال, if the gold logo also needs to be embossed, the factory must understand whether the embossing follows the exact foil shape or covers a larger area.
لذلك, clearly label each layer.
Useful layer names include:
- GOLD FOIL
- EMBOSS
- CUT LINE
- CREASE LINE
- INSERT
That may sound basic, but it can prevent a surprising number of misunderstandings.
العناية بالبشرة ومستحضرات التجميل
Skincare packaging usually contains more text.
قد يشمل هذا:
- اسم المنتج
- مكونات
- الاتجاهات
- Net contents
- Warnings
- Manufacturer information
- Batch area
- الباركود
نتيجة ل, text size and spacing become especially important.
Before sending the file, zoom in and check whether any important information sits too close to a fold, glue flap or edge.
الشاي والقهوة
Tea and coffee packaging often combines branding with:
- Product origin
- مكونات
- تعليمات التخمير
- Flavor notes
- وزن
- الباركود
- Food information
If the product uses kraft paper, remember that the natural brown paper will influence the appearance of printed colors.
لذلك, the same CMYK artwork can look different on white art paper and natural kraft.
الشوكولاتة والحلوى
Chocolate and confectionery packaging may use colorful illustrations, photographs and metallic finishing.
علاوة على ذلك, food packaging can contain considerable mandatory text.
When a window is included, the artwork must also account for the exact visible opening.
Do not place important text too close to the window die line.
الشموع
Candle packaging often uses restrained artwork.
على سبيل المثال:
- Brand logo
- Scent name
- Botanical illustration
- وزن المنتج
- Safety information
A dark matte background with a small foil logo can look sophisticated.
لكن, dark areas also make scratches, registration errors and uneven edges more noticeable.
لذلك, physical sampling becomes particularly valuable.
Gift Products
Gift packaging allows more design freedom.
مع ذلك, the structure may be more complicated.
صناديق مغناطيسية, صناديق درج, sleeves and telescopic packaging all have multiple visible surfaces.
لذلك, the artwork should consider the customer’s opening sequence rather than only the closed front view.
خيارات المواد
Paper selection affects how custom packaging artwork files should be prepared and how the printed design will finally appear.
ورق الكرافت
Natural kraft has its own brown base color.
بالتالي, printed colors can appear darker and less saturated than they do on a white computer screen.
For a clean kraft design, يعتبر:
- الطباعة السوداء
- Dark green
- Brown
- Simple Pantone colors
- White ink where supported
- رقائق الذهب أو النحاس
The natural paper itself can become part of the design.
ورق فني
Coated art paper provides a smoother, whiter printing surface.
لذلك, it works well for:
- كميك
- التصوير الفوتوغرافي
- التدرجات
- Fine typography
- الرسوم التوضيحية التفصيلية
- ألوان بانتون
بعد الطباعة, it can also receive matte, لمعان, soft-touch or anti-scratch lamination.
ورق متخصص
Specialty papers may include:
- نسيج الكتان
- Leather texture
- Pearl finish
- Metallic surface
- Dyed-through color
- Embossed texture
لكن, deep texture can affect small typography and fine foil details.
لذلك, the artwork may need to be simplified.
A logo with extremely thin lines may look beautiful on screen but reproduce poorly on a strongly textured paper.
Food-Grade Paper
Food-related packaging may use specific internal papers, coatings or liners.
The decorative artwork normally remains on the outside. في أثناء, the food-contact materials are selected according to the application.
لذلك, do not assume that the printed decorative layer itself provides food-contact protection.
Foil-Lined Structures
Paper tubes for tea, قهوة, snacks or other food products may use an aluminum foil or multilayer inner liner.
عادة, the artwork file controls the exterior design, while the liner is defined in the material specification.
لكن, if the package includes a printed inner surface, confirm whether a separate inner artwork file is required.
خيارات الهيكل
Different packaging structures need different artwork logic.
أنبوب الورق القياسي
A paper tube artwork normally includes:
- Main body
- Vertical seam allowance
- غطاء
- Bottom section
The designer should identify the primary viewing area and avoid placing the main logo directly on the seam.
أنبوب الكتف والرقبة
Shoulder-neck tubes include an inner neck visible after opening.
This creates another branding opportunity.
على سبيل المثال, the outside may be dark green while the inner neck uses gold or cream.
لكن, this visible inner component should be included in the approved material or artwork specification.
أنبوب تلسكوبي
A telescopic tube contains a longer upper section and shorter base.
The artwork may need to align visually when the package is closed.
لذلك, carefully confirm:
- Lid height
- Base height
- Overlap
- Front orientation
Never design these areas using estimated dimensions.
أنبوب النافذة
Window artwork requires an exact die-cut position.
The design should consider:
- Window shape
- Window size
- Window film
- Product position
- Text clearance
علاوة على ذلك, the product or inner pouch should remain aligned behind the opening.
Paper Tube With Insert
An insert may be:
- إيفا
- إيبي
- الورق المقوى
- لب مصبوب
- صينية بلاستيكية
If the insert contains printed paper or a branded card, provide separate artwork for that component.
أنبوب الضغط
Push-up packaging has functional moving areas.
لذلك, avoid placing critical text where the mechanism, seams or bottom movement may interfere with visibility.
أنبوب ملتوي
Twist-up structures require even more precise structural dimensions.
نتيجة ل, the dieline should be approved before any final branding artwork is completed.
Sleeve Packaging
A sleeve may be one of the easiest ways to differentiate multiple SKUs.
على سبيل المثال, five products can share the same inner structure while each uses a different printed sleeve.
This can simplify both production and inventory.
الطباعة & خيارات التشطيب
This is where custom packaging artwork files often become more complicated.
Every special printing or finishing process should be clearly separated.
طباعة كميك
CMYK is the standard process-color approach for many printed packaging applications.
Adobe recommends CMYK color mode for documents prepared for process-ink printing.
CMYK مناسب ل:
- صور فوتوغرافية
- التدرجات
- الرسوم التوضيحية
- Multi-color graphics
If the design was originally created in RGB, colors may change when converted for print.
لذلك, do not approve critical packaging colors based only on a phone or monitor.
بانتون / Spot Colors
Pantone or other spot colors may be useful when a brand needs a specific signature color.
على سبيل المثال:
- Brand green
- Luxury burgundy
- Specific navy
- Corporate orange
Clearly identify the required spot color rather than supplying only an approximate RGB reference.
مع ذلك, paper type and surface finishing can still affect the final visual result.
لذلك, physical color samples may be appropriate for strict brand requirements.
ختم ساخن
Hot-stamping artwork should normally be provided as a separate vector layer.
Avoid sending a rasterized gold gradient and expecting it to become metallic foil.
بدلاً من, create a clearly labeled vector area such as:
GOLD FOIL
The foil artwork should generally use clean shapes and paths.
على نفس المنوال, ask the supplier to review extremely fine details before tooling.
النقش
Embossing raises the paper surface.
لذلك, provide a separate layer showing exactly which areas should be raised.
على سبيل المثال:
EMBOSS
If foil and embossing need to align, make that requirement explicit.
النقش
Debossing presses the design inward.
Like embossing, it requires clear vector artwork and separate identification.
بقعة الأشعة فوق البنفسجية
تعمل تقنية Spot UV على إنشاء تباين لامع على مناطق محددة.
Provide a dedicated layer, مثل:
SPOT UV
Do not merge it into the main CMYK image.
خلاف ذلك, the printer may not know which graphic element needs the coating.
ماتي التصفيح
Matte lamination usually covers the full printed surface.
لذلك, it may not require a separate artwork layer.
بدلاً من, specify it in the order or finishing instructions.
التصفيح اللامع
Gloss lamination works in a similar way.
لكن, if only selected areas should be glossy, the project may actually require spot UV rather than full gloss lamination.
تصفيح ناعم الملمس
Soft-touch film also normally covers the entire surface.
Because the film changes the appearance and tactile feel of printed colors, physical samples are valuable for premium packaging.
How to Prepare Print-Ready Custom Packaging Artwork Files
Before sending custom packaging artwork files to the factory, go through the following checklist.
1. Use the Final Approved Dieline
Do not build production artwork on an old sample or early structural version.
If the box dimensions change, request the updated dieline.
2. Do Not Resize the Dieline
Packaging dielines are normally supplied at actual production scale.
لذلك, do not stretch, crop or proportionally resize them unless the supplier specifically instructs you to do so.
3. Add the Required Bleed
Background colors, photographs and graphics that reach the trim edge should extend into the bleed area.
Again, use the bleed specified by the packaging supplier.
4. Keep Important Elements Inside the Safe Zone
Keep:
- الشعارات
- Small text
- الرموز الشريطية
- أسماء المنتجات
- Regulatory information
away from cutting and folding tolerances.
5. Use CMYK for Process Printing
If the project will use four-color process printing, prepare the artwork for the correct print color workflow.
Adobe specifically identifies CMYK as the appropriate color mode for process-ink printing.
6. Identify Pantone Colors Clearly
Do not write only:
“Please match this green.”
بدلاً من, provide the correct color reference when one is required.
7. Convert Fonts to Outlines or Package Them Correctly
Missing fonts can change the entire layout.
Adobe Illustrator supports converting type to outlines through Type > Create Outlines. Once converted, the type becomes paths and is no longer editable as normal text.
لذلك, keep an editable backup before outlining.
Another option is to package the file with the required fonts, subject to font licensing and supplier workflow.
8. Check Linked Images
A very common problem occurs when the AI file opens correctly on the designer’s computer but images disappear when the supplier opens it.
لماذا?
The images were linked but not included.
Adobe’s Illustrator Package function can collect the Illustrator document, linked graphics and supported fonts for file handoff.
لذلك, either:
- Package the complete job correctly, أو
- Embed appropriate linked artwork
before delivery.
9. Use Suitable Image Quality
Do not enlarge a small web image until it looks blurry.
بدلاً من, provide production-quality original artwork at the size required for print.
For photographs, check the effective resolution at final placed size.
10. Keep Logos as Vector Artwork
كلما كان ذلك ممكنا, logos should remain vector.
This provides cleaner:
- الطباعة
- Foil edges
- النقش
- Small text
- Scaling
11. Separate Special Finishing Layers
Recommended layer structure might look like:
- DIELINE
- CMYK PRINT
- PANTONE
- GOLD FOIL
- EMBOSS
- DEBOSS
- SPOT UV
- WINDOW
This makes production intent much clearer.
12. Do Not Delete the Technical Dieline
Keep the dieline available for production review.
لكن, it should remain on its own layer and should not accidentally print as part of the customer-facing design.
13. Check Overprint Settings
Unexpected overprint settings can cause certain objects to disappear or print incorrectly.
لذلك, overprint should be checked during prepress, particularly for complex spot-color or finishing files.
Adobe provides dedicated overprint and print-separation tools for reviewing this behavior.
14. Export a Print-Ready PDF
Along with the editable AI file, providing a PDF reference is extremely useful.
The PDF shows the intended final layout and gives the factory something to compare against.
15. Include a Visual Mockup
A 3D mockup is not a production file.
لكن, it is extremely helpful as a visual reference.
It tells the prepress team:
- Which side is the front
- How the package should close
- Which logo is most important
- How the finished structure should look
لذلك, the strongest file handoff often includes both technical artwork and a visual reference.
Packaging Artwork Preflight Checklist
Before clicking “Send,” check:
- Correct dieline version
- Correct package dimensions
- Bleed included
- Safe area checked
- CMYK artwork prepared
- Pantone colors identified
- Fonts outlined or correctly supplied
- Linked images included or embedded
- Logos are vector where possible
- Image quality checked
- Barcode checked
- Product text proofread
- Foil layer separated
- Embossing layer separated
- Debossing layer separated
- Spot UV layer separated
- Window layer confirmed
- Dieline remains separate
- PDF reference exported
- 3D mockup included
- Final artwork approved internally
Adobe Acrobat’s Preflight tools can also analyze PDF files for print-production conditions before output.
How Artwork Files Affect Packaging Production Time
Poorly prepared artwork can directly delay sampling and production.
على سبيل المثال, imagine the following sequence:
- The supplier receives a JPG.
- Editable artwork is requested.
- The designer sends AI.
- Several linked images are missing.
- The files are resent.
- The dieline is outdated.
- The artwork is rebuilt.
- The foil layer is not separated.
- Another revision is required.
فجأة, several days have disappeared before printing even begins.
على النقيض من ذلك, properly prepared custom packaging artwork files allow the prepress team to check the design, confirm manufacturing feasibility and move toward sampling more efficiently.
Planning a Product Launch?
Artwork preparation is only one part of the complete production schedule.
If you are also planning sampling, mass production and delivery, اقرأ لدينا وقت إنتاج أنبوب الورق المخصص: دليل المهلة الكاملة.
That guide explains how:
- الموافقة على العمل الفني
- أخذ العينات
- موك
- توافر المواد
- إدراجات
- Special finishing
- وحدات SKU متعددة
can affect the complete packaging timeline.
معاً, these two guides answer two practical questions:
Is my artwork ready for printing?
و
How long will my packaging take once the artwork is approved?
Common Artwork Mistakes That Delay Production
Sending Only a Screenshot
A screenshot cannot usually provide the editable layers required for production.
بدلاً من, provide editable artwork plus a PDF reference.
Using RGB Colors for Critical Print Matching
Colors that look bright on a monitor may not reproduce identically in process printing.
لذلك, prepare the correct print workflow and approve important colors realistically.
Missing Fonts
If a supplier does not have the font used in the artwork, text may change or disappear.
Outline fonts or supply them through an appropriate packaged workflow.
Missing Linked Images
This is one of the easiest problems to avoid.
Check the Illustrator Links panel before delivery. Adobe’s Links panel tracks whether placed artwork is linked or embedded.
Using a Low-Resolution Logo
A small web logo may look acceptable on a screen but poor in print.
Ask the brand team for the original vector logo.
Putting All Finishes on One Layer
If foil, embossing and UV are merged into the main artwork, the production team may need to rebuild the file.
لذلك, separate them from the start.
Changing the Dieline After Design Approval
Structure should come first.
If the dimensions change after artwork approval, the layout may need to be redesigned.
Designing Across Hidden Areas
Some parts of packaging disappear beneath:
- Lid overlap
- Glue areas
- Tube seams
- Inner folds
لذلك, always study the assembled structure before positioning important branding.
امتثال & الاستدامة
Artwork is not only about aesthetics.
Depending on the product and destination market, the final packaging may need to display specific information.
طعام, cosmetics and other regulated products may require items such as:
- اسم المنتج
- Net contents
- مكونات
- Warnings
- Manufacturer details
- Lot or batch areas
- Recycling information
- الباركود
- Market-specific symbols
The brand or importer should confirm exactly which regulatory statements are required for the final market.
في أثناء, the packaging manufacturer can help ensure the provided text fits the approved structure.
FSC
If FSC claims or marks are intended for packaging, their use should match the applicable certified material, chain-of-custody status and approval requirements.
لذلك, do not simply copy an FSC logo from the internet into the artwork.
سلامة الاتصال بالأغذية
Food-contact safety comes from the approved material construction rather than from the graphics alone.
اعتمادا على المشروع, relevant support may include:
- تقارير الاتصال الغذائي
- الإقرارات المادية
- تقارير الهجرة
- معلومات الحبر
- معلومات لاصقة
BRC and IFS
BRCGS or IFS-related supplier documentation may support packaging quality or food-industry procurement requirements.
لكن, these should not be presented as decorative product logos unless their use is appropriate and permitted.
EUDR وEPR
For applicable European projects, brands may also need to consider relevant material due diligence, packaging EPR requirements and market-specific packaging information.
بالتالي, the artwork approval process should include the brand’s regulatory or compliance team when necessary.
Sustainable Design
Artwork itself can also influence material use.
على سبيل المثال, a premium design does not always require:
- Full plastic lamination
- Large metallic foil areas
- Multiple decorative layers
- Oversized boxes
بدلاً من, strong typography, thoughtful color and paper texture can create a premium presentation with fewer decorative processes.
كيفية التخصيص
Preparing custom packaging artwork files becomes much easier when the packaging project follows the correct order.
خطوة 1: إرسال معلومات المنتج
يمد:
- نوع المنتج
- أبعاد المنتج
- وزن المنتج
- Product photos
- Physical sample when possible
خطوة 2: Confirm the Packaging Structure
يختار:
- أنبوب الورق
- صندوق جامد
- كرتونة قابلة للطي
- صندوق درج
- كم
- صندوق مغناطيسي
- Window structure
- هيكل تلسكوبي
خطوة 3: Confirm the Final Size
Do not finalize artwork before dimensions are approved.
خطوة 4: Choose the Materials
Select:
- ورق كرافت
- ورق فني
- ورق خاص
- Food-grade material
- بطانة احباط
خطوة 5: تأكيد الإدراج
يختار:
- لا إدراج
- الورق المقوى
- إيفا
- إيبي
- لب مصبوب
- صينية بلاستيكية
خطوة 6: Confirm Printing
تحديد:
- كميك
- بانتون
- الطباعة بلون واحد
- Mixed printing
خطوة 7: Confirm Finishing
Select:
- ختم ساخن
- النقش
- النقش
- بقعة الأشعة فوق البنفسجية
- ماتي التصفيح
- التصفيح اللامع
- التصفيح لمسة ناعمة
- تصفيح مضاد للخدش
خطوة 8: Request the Final Dieline
Only after the structure and dimensions are confirmed should the final artwork be placed.
خطوة 9: تحضير العمل الفني
Use editable AI, PDF or EPS files.
فضلاً عن ذلك, clearly separate special finishes.
خطوة 10: تأكيد موك
Tell the supplier your realistic order quantity.
على سبيل المثال:
- 500 جهاز كمبيوتر شخصى
- 1,000 جهاز كمبيوتر شخصى
- 3,000 جهاز كمبيوتر شخصى
- 5,000 جهاز كمبيوتر شخصى
- 10,000 جهاز كمبيوتر شخصى
خطوة 11: تأكيد المهلة الزمنية
يشارك:
- Launch date
- Required factory completion date
- Delivery destination
خطوة 12: Approve the Sample
Check:
- بناء
- مقاس
- عمل فني
- لون
- احباط
- النقش
- Insert fit
- Product positioning
Only after approval should mass production begin.
المنتجات ذات الصلة: أنابيب ورقية مخصصة / تغليف المواد الغذائية / تغليف مستحضرات التجميل
لماذا تختار التعبئة والتغليف?
Pack Packaging supports custom paper tubes and paper boxes from structural development through printing and mass production.
تغطي مرافق التصنيع لدينا 20,000㎡, بما في ذلك أ 2,000㎡ ورشة عمل للطعام. فضلاً عن ذلك, تتجاوز سعة أنبوب الورق الشهرية 10,000,000 قِطَع.
ملكنا 20+ فريق تصميم الأعضاء يمكن أن تساعد في:
- Structural dielines
- Product fitting
- تخطيط العمل الفني
- File checking
- اختيار المواد
- إدراج التنمية
- الطباعة
- ختم ساخن
- النقش
- بقعة الأشعة فوق البنفسجية
- أخذ العينات
- Production optimization
When buyers send custom packaging artwork files, our team reviews the file against the actual packaging structure instead of checking the graphic design in isolation.
وتشمل قدرات تصنيع المعدات الأصلية وأوديإم:
- Custom dimensions
- أنابيب ورقية
- صناديق جامدة
- كرتونة قابلة للطي
- صناديق درج
- صناديق الأكمام
- ورق كرافت
- ورق فني
- ورق خاص
- المواد الغذائية
- إدراج الورق المقوى
- إدراج إيفا
- إدراجات EPE
- إدراجات اللب المصبوب
- الطباعة كميك
- طباعة بانتون
- ختم ساخن
- النقش
- النقش
- بقعة الأشعة فوق البنفسجية
- ماتي التصفيح
- التصفيح اللامع
- التصفيح لمسة ناعمة
- تصفيح مضاد للخدش
- العينات الهيكلية
- العينات المطبوعة
- فحص الجودة
- تعبئة الصادرات
اعتمادا على المواد المختارة والتطبيق, قد تشمل الوثائق الداعمة FSC, تقارير الاتصال الغذائي, الوثائق المتعلقة بـ BRC, الوثائق المتعلقة بـ IFS, بنفايات 2.0, معلومات دعم REACH-SVHC وEPR.
The exact documentation should always be confirmed against the approved specification and target market.
الأسئلة المتداولة
1. Which artwork file format should I send for custom packaging?
الذكاء الاصطناعي قابل للتحرير, PDF or EPS files are generally preferred. A PDF reference or 3D mockup can also help communicate how the finished package should look.
2. Should packaging artwork be CMYK or RGB?
For process printing, artwork should be prepared using an appropriate CMYK print workflow. Adobe also recommends CMYK for documents intended for process-ink printing.
3. Should I convert fonts to outlines?
Converting fonts to outlines can prevent missing-font problems. لكن, keep a separate editable backup because outlined text can no longer be edited as normal type.
4. How much bleed should packaging artwork have?
Many print workflows use approximately 3 مم, but the correct bleed depends on the factory’s dieline and production process. لذلك, always follow the bleed specified by your packaging supplier.
5. Do foil stamping and embossing need separate artwork?
نعم. ختم ساخن, النقش, debossing and spot UV should normally be clearly identified as separate production layers or vector areas.
6. Can I send a Canva, JPG or PNG design?
These can be useful references, but a manufacturer may still need editable production artwork. Ask the prepress team what file format is required before sampling.
7. Why does my printed packaging color look different from my monitor?
Screens and printing use different color systems, while paper, حبر, lamination and lighting also influence the final result. لذلك, physical color approval is important when exact color matching matters.
8. Can your design team help prepare my artwork?
نعم. If you provide the logo, نص, product information and design direction, the artwork can be reviewed or adjusted to fit the approved structure before sampling.
اكتشف المزيد من حلول التغليف المخصصة
تبحث عن المزيد من خيارات التعبئة والتغليف? اكتشف مجموعتنا الكاملة من منتجات التغليف المخصصة المصممة لمختلف الصناعات والتطبيقات.
صناديق قابلة للطي – علب كرتون خفيفة الوزن وقابلة للتخصيص بالكامل لتغليف التجزئة.
الصناديق الصلبة – علب هدايا صلبة مميزة للعلامات التجارية الفاخرة.
صناديق مموجة – حلول متينة للشحن وتغليف التجارة الإلكترونية.
صناديق مقاومة للأطفال - التغليف الآمن للمنتجات الخاضعة للرقابة.
مُكَمِّلات - إدراجات مخصصة, المناديل الورقية, شرائط, التسميات, وأكثر.
أنابيب الورق - اكتشف مجموعتنا المخصصة من عبوات الورق المخصصة للشاي, قهوة, مستحضرات التجميل, الشموع, المشروبات الروحية, وغيرها من المنتجات المميزة على موقعنا المتخصص.
تحتاج إلى تغليف مخصص? اتصل بفريقنا اليوم للحصول على عرض أسعار مجاني واستشارة الخبراء.
